- How to Replace a belt on a Kirby vacuum cleaner Home Appliances
- Kirby G4 Vacuum Refurbished - Free Shipping Today - Overstock.
- Kirby G4 Vacuum eBay
- Kirby G4
How to Replace a belt on a Kirby vacuum cleaner Home Appliances
Remove the two rear screws that are now visible that hold the aluminum shell on.
Kirby G4 Vacuum Refurbished - Free Shipping Today - Overstock.
1) Remove the handle, cloth bag assembly and power nozzle from the machine 2) Turn the main unit around so that you are looking at the on/off switch and remove the screw that is rht above the neutral/drive button (not underneath the machine, but on the rear between the on/off button and the N/D button) 3) Remove the smaller screw that holds the cord to the machine (located to the rht, between where the handle plugs into the unit and the on/off switch) This requires the smaller Torx driver.
Kirby G4 Vacuum eBay
4) Insert the tip of the flathead screwdriver into the small open slot in the center of the "scuff plate" (the plastic trim piece) and pry gently upward to remove the plastic piece.
Kirby Avalir Vacuum Cleaner - Consumer Reports
Now lift the hood and remove the two long screws at the top of the fan case that were uncovered when you took the top shell off.
Kirby g4 vaccuum manual:
Rating: 93 / 100
Overall: 92 Rates